WiFi and app on every model
PV100, PV200 and PV300 include WiFi/app according to the current product sheet.
Indol EcoSave
Heat pump water heater
Indol EcoSave
EcoSave is our enamel range of heat pump water heaters with built-in WiFi and app control. Replace your old water heater and reduce the cost of hot water — choose from PV100, PV200 and PV300.
A+**Energy class
116%Energy efficiency
115 LHot water at 40 °C
3,42COP · EN 16147
PV models are ordered by verified resellers. Consumers can submit a quote request.
Temporarily out of stock — expected back in December.
Technical specifications
PV100 · values from the product sheet, with updated dimensions
Article number300
RSK number693 70 24
Tank volume100 litres
Available hot water115 litres (at 40 °C, set to 55 °C)
Dimensions (diameter × height)Ø560 × 1117 mm
Dry weight68 kg
Water connection1/2″ external
Approved pressure10 bar
Safety valveNot included
Heat pump output900 W*
Power input250 W*
Immersion heater1500 W · single phase
Hybrid output2400 W*
Slow fuse10 A
Recommended temperature45–55 °C
Legionella functionYes
Heat pump operating range−5 … +43 °C
Air connection125 mm
Airflow250 / 180 m³/h (full / half)
Pressure drop70 Pa
Sound outdoors / indoors at 2 m45 / 54 dB(A)***
RefrigerantR290 / 150 g
Automatic restartYes
Energy classA+**
Energy efficiency116%*
COP · EN 16147 (20/15 °C)3,42*
Load profileM
Annual energy442 kWh*
Daily energy1,21 kWh*
WiFi / appYes
Local timerNo
Programs3
* Values measured with 20 °C incoming air under EU 814/2013.
** The product sheet states A+ and notes that this already meets the requirements of the forthcoming A++ class under EU 814/2013. This reflects the document's note, not a promise of current certification.
*** Sound measured with a 160 mm ventilation hose. A smaller hose diameter may increase sound levels.
Ø denotes the diameter of the cylindrical water heater. Dimensions are shown as diameter × height. The PV300 height has been updated to 1905 mm; the linked original product sheet contains an older dimension entry.
EcoSave PV
Why choose EcoSave?
An enamelled water heater with an integrated heat pump and connected features that vary by model.
A model-specific timer
PV200 and PV300 have two start and two stop times. PV100 has no local timer.
Three tank sizes
Choose PV100, PV200 or PV300 to suit your household's hot-water needs.
Documents
EcoSave PV100 / PV200 / PV300 – Produktblad
Current product sheet with model data for PV100, PV200 and PV300.
Separate models
EcoSave C100 and C160
C100 and C160 are presented separately from the PV range. They have plumbing connections underneath and can be wall-mounted or placed on a compatible floor stand.
EcoSave C100
100 liter
Recommended price 19 995 kr incl. VAT
- Article number
- 303
- RSK number
- 693 60 21
EcoSave C160
160 liter
Recommended price 21 995 kr incl. VAT
- Article number
- 304
- RSK number
- 693 60 22
Important for floor-stand installation
When placing EcoSave C100 or C160 on the floor, the tall stand, article 812, is required to allow inspection and replacement of the magnesium anode.
Shop tall stand and accessoriesFor existing owners
Documents and help
Choose the right place for manuals, troubleshooting or spare parts for an installed EcoSave.
Manuals and guides
Find manuals, WiFi guides and instructions for EcoSave.
Open manualsTroubleshooting and support
Send the model, serial number, issue description and photos so we can help.
Start a support requestSpare parts
Available EcoSave spare parts remain in the shop for existing products.
View spare partsNeed help with your EcoSave?
Send a support request with the model, serial number and photos, and our team will help you.